Skip disability assistance statement.

Welcome to our website! As we have the ability to list over one million items on our website (our selection changes all of the time), it is not feasible for a company our size to record and playback the descriptions on every item on our website. However, if you have a disability we are here to help you. Please call our disability services phone line at (262) 242-5599 during regular business hours and one of our kind and friendly personal shoppers will help you navigate through our website, help conduct advanced searches, help you choose the item you are looking for with the specifications you are seeking, read you the specifications of any item and consult with you about the products themselves. There is no charge for the help of this personal shopper for anyone with a disability. Finally, your personal shopper will explain our Privacy Policy and Terms of Service, and help you place an order if you so desire.

Monoblock Class D Amplifier, 1000 W

JL Audio 10001V2

Features

  • Patented Technology: High-Damping Class D Circuit with discrete control circuitry (U.S. Patent #6,441,685)
  • Inputs: 1 pair of inputs
  • On-board Crossover: Fully-variable (40 - 200 Hz), selectable-slope (12 or 24 dB per octave) LP
  • Preamp Output: 2-channel (independent active filter, parallel with amplifier filter or pass through)

Quick Specs

  • Type: Amplifiers
  • Energy Star Rated: No

See More

 

Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 1.5-4 Ω

This high-powered icon has made its mark over a decade-long production run, thanks to its prodigious real-world power delivery, fidelity and ruggedness.

Efficient Class D technology with a patented control circuit and JL Audio's signature R.I.P.S. power supply design ensure full power delivery (1000 W) over a wide range of load impedances and vehicle voltages.

The 1000/1v2 also boasts a very complete set of signal processing features, including a parametric bass EQ and fully variable infrasonic filter.

This amplifier features a brushed aluminum finish with black powder-coated cast alloy heat sink and end caps.

Technology
R.I.P.S. - Regulated, Intelligent Power Supply

The remarkable R.I.P.S. System ensures consistent power delivery over a wide range of battery voltages and load impedances.

Advanced Rollback Protection

JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events.

Patented Class D Circuitry (U.S. Patent #6,441,685)

Our Patented Class D amplifier circuit delivers high efficiency without sacrificing fidelity.

RealSink™

Vertical, cast alloy fins effectively dissipate heat, without resorting to noisy fan-cooling.

Features

  • Patented Technology: High-Damping Class D Circuit with discrete control circuitry (U.S. Patent #6,441,685)
  • Inputs: 1 pair of inputs
  • On-board Crossover: Fully-variable (40 - 200 Hz), selectable-slope (12 or 24 dB per octave) LP
  • Preamp Output: 2-channel (independent active filter, parallel with amplifier filter or pass through)
  • Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option
  • Infrasonic Filter: Fully-variable 24dB/octave from 15-60 Hz
  • Output Polarity Reversal: Switch permits instant output polarity reversal
  • Dual mono speaker output connections: Accept up to 8 AWG wire
  • +12V and Ground connections: Accept 4 AWG wire (required)
  • Rated Power: 1000 W RMS @ 1.5 ohm - 4 ohm (11V-14.5V)
  • THD at Rated Power: <0.05% @ 4 ohm
  • S/N Ratio: >95dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Frequency Response: 5 Hz - 250 Hz (+0, -1dB)
  • Damping Factor: >500 @ 4 ohm / 50 Hz
  • Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS
Rated Continuous (RMS) Power @ 14.4 V
@ 4 1000 W RMS x 1
@ 3 1000 W RMS x 1
@ 2 1000 W RMS x 1
@ 1.5 1000 W RMS x 1
Rated Continuous (RMS) Power @ 12.5 V
@ 4 1000 W RMS x 1
@ 3 1000 W RMS x 1
@ 2 1000 W RMS x 1
@ 1.5 1000 W RMS x 1
General Specifications
Frequency Response 5 Hz - 250 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power >95 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Main Channels) >65 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 >500 / 50 Hz
Damping Factor @ 2 >250 / 50 Hz
THD+N @ Rated Power (Main Channels)
Input Voltage Range @ RCA Inputs 200 mV - 8 V RMS
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 100 A (AFS, AGU or MaxiFuse )
Signal Processing
Filter Mode(s) Low-Pass only
Filter Slope(s) 12/24 dB/octave
Filter Frequency Range 40 Hz -200 Hz
Detented, Calibrated Filter Freq. Potentiometer Yes
Filter Defeat Function Yes
Infrasonic Filter Variable, Defeatable
Bass Boost EQ Parametric
Output Polarity Switch Yes
Remote Subwoofer Level Control No
Remote Bass EQ Boost Control Optional (RBC-1)
Pass-Through Preamp Output Buffered, w/independent filter
Physical Specifications
Height (H) 2.36 in / 60 mm
Width (W) 19.7 in / 500 mm
Depth (D) 9.25 in / 235 mm

Quick Specs


  • Appearance

  • Type: Amplifiers

  • Features

  • Energy Star Rated: No

1000/1v2 Manual

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Electronics can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new electronics should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.