Enclosed Subwoofer System with Single 12W6v2-D4 Subwoofer Driver, Black Carpet / Black Vinyl (600 W, 2 ohm) - Sealed Enclosure
If you need a highly compact subwoofer solution that does not sacrifice sound quality, this ProWedge™ system is made for you. The superb performance capabilities of the W6v2 subwoofer driver are harnessed within a very compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level.
This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12W6v2 and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.
Finish: Black, high-grade automotive carpet on the top, back and bottom surfaces, with black vinyl on the front baffle and sides. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 200 - 600W
Nominal Impedance: 2 ohm (subwoofer driver can be rewired to 8 ohms)
TechnologyDynamic Motor Analysis - DMA Optimized MotorJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.
Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902)JL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
Floating Cone Attach Method - FCAM™ (U.S. Patent #6,501,844) This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
W6v2/W6v3 Terminal Jumper SystemInformation on connecting the dual voice coils using the Terminal Jumper System
W-Cone (U.S. Patent #6,496,590)The W-Cone is a unit-body cone assembly that delivers astonishing cone stiffness with minimal mass. The shape also provides superb torsional rigidity, which is critical to maintaining voice coil alignment at the suspension limits.
NeckVent™ Cooling (Patent Pending)Vents at the neck of the lower cone body work in conjunction with the pole vent's airflow to effectively remove hot air during high power operation.
Engineered Lead-Wire System (U.S. Patent #7,356,157)
Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.
Customizable Trim Ring (U.S. Patent #D480,709)This removable ring can be painted to match the installation theme and directly receives JL Audio grille mesh inserts (sold separately).
Precision Built in U.S.A.JL Audio's Miramar, Florida loudspeaker production facility is one of the most advanced in the world.
