Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 / 500 W x 1 @ 4 - 14.4V
This amazingly compact amplifier delivers a real kilowatt of power at an unbelievably great price. Using a tough-as-nails Class D circuit with a robust MOSFET power supply, the JX1000/1D is fully capable of driving the toughest subwoofer loads with very good control and excellent sound quality.
Targeted specifically for subwoofer applications, the JX1000/1D includes a low-pass filter with continuously variable cutoff frequency selection from 50-200 Hz. It also features a variable bass boost at 45 Hz. with up to 12 dB of boost and an optional remote level control. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs, making it easy to integrate with a variety of OEM and aftermarket head units.
Technology Class D Circuitry Subwoofer-optimized, Class D amplifier circuit delivers high efficiency without sacrificing low-frequency fidelity.
- Inputs: One Mono Pair (RCA Low-Level) or Multi-Pin (High-Level)
- Subwoofer Crossover: 12 dB/octave with continuously variable cutoff frequency selection from 50 - 200 Hz. Non-defeatable.
- Preamp Output: Pass-through with RCA-type jacks
- Bass EQ: Single-band with 45 Hz center frequency, adjustable from 0 to +12dB.
- Rated Power 14.4 V: 500W x 1 @ 4 ohm, 1000W x 1 @ 2 ohm
- THD at Rated Power: 1% @ 4 ohms
- Frequency Response: 20 Hz - 150 Hz +/- 1 dB
- Input Range: 200mV - 4V RMS (Low-Level), 2.0V - 10V RMS (High-Level)
@ 4 |
500 W RMS x 1 |
@ 3 |
750 W RMS x 1 |
@ 2 |
1000 W RMS x 1 |
@ 1.5 |
N/A |
@ 4 |
500 W RMS x 1 |
@ 3 |
700 W RMS x 1 |
@ 2 |
900 W RMS x 1 |
@ 1.5 |
N/A |
Frequency Response |
20 Hz - 150 Hz (+0, -1dB) |
S/N Ratio, referred to highest rated power |
>75 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W |
>45 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 |
>1000 / 50 Hz |
Damping Factor @ 2 |
>500 / 50 Hz |
THD+N @ Rated Power |
<1% @ 2 per Ch. |
Input Voltage Range @ High-Level Inputs |
2 V - 10 V RMS |
Input Voltage Range @ RCA Inputs |
200 mV - 4 V RMS |
Min.Copper Power / Ground Wire Gauge |
4 AWG wire |
Fuse Rating |
80 A (AFS, AGU or MaxiFuse™) |
Filter Mode(s) |
Low-Pass only |
Filter Slope(s) |
12 dB/octave |
Filter Frequency Range |
50 Hz - 200 Hz |
Detented, Calibrated Filter Freq. Potentiometer |
No |
Filter Defeat Function |
No |
Infrasonic Filter |
none |
Bass Boost EQ |
0 to +12 dB @ 45 Hz |
Output Polarity Switch |
No |
Remote Subwoofer Level Control |
Optional (RBC-1) |
Remote Bass EQ Boost Control |
No |
Pass-Through Preamp Output |
Buffered |
Height (H) |
2.09 in / 53 mm |
Width (W) |
10.94 in / 278 mm |
Depth (D) |
7.68 in / 195 mm |
Net Weight |
3.75 lb / 1.70 kg |
-
-
Type:
Amplifiers
-
-
Width:
10.94"
-
Height:
2.09"
-
Depth:
7.68"
-
-
Energy Star Rated:
No
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Electronics
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
electronics
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.