Monoblock Class D Marine Subwoofer Amplifier, 600 W x 1 @ 2 / 400 W x 1 @ 4 - 14.4V
This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 load (14.4V, 1% THD).
Technology NexD™ Switching Technology NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs.
Advanced Rollback Protection JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events.
- Patented Technology: Single Cycle Control. (U.S. Patent #6,084,450*)
- Inputs: Differential-balanced with RCA jack inputs
- On-board Crossover: State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable).
- Preamp Output: Buffered pass-through type
- Infrasonic Filter: 24 dB/octave Butterworth @ 30 Hz, defeatable
- Dual mono subwoofer output connections: Accept up to 12 AWG wire
- +12V and Ground connections: Accept up to 4 AWG wire
- Rated Power: 600 W RMS @ 2 ohm (14.5V)
- Rated Power 14.4 V: 400W RMS x 1 @ 4 ohms 600W RMS x 1 @ 2 ohms
- Rated Power 12.5 V: 300W RMS x 1 @ 4 ohms 500W RMS x 1 @ 2 ohms
- THD at Rated Power: 1% @ 2 ohm
- S/N Ratio: >87 dB referred to rated power (A-weighted, 20 Hz-20 kHz noise bandwidth), >67 dB referred to 1W (A-weighted, 20 Hz-20 kHz noise bandwidth)
- Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
- Damping Factor: >1000 @ 4 ohms / 50 Hz, >500 @ 2 ohms / 50 Hz
- Input Range: 100mV - 4V RMS
|
| @ 4 |
400 W RMS x 1 |
| @ 3 |
500 W RMS x 1 |
| @ 2 |
600 W RMS x 1 |
| @ 1.5 |
N/A |
|
| @ 4 |
300 W RMS x 1 |
| @ 3 |
400 W RMS x 1 |
| @ 2 |
500 W RMS x 1 |
| @ 1.5 |
N/A |
|
| Frequency Response |
7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power |
>87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W |
>59 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 |
>1000 / 50 Hz |
| Damping Factor @ 2 |
>500 / 50 Hz |
| THD+N @ Rated Power |
<1% @ 2 per Ch. |
| Input Voltage Range @ RCA Inputs |
100 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge |
4 AWG wire |
| Fuse Rating |
50 A (AFS, AGU or MaxiFuse™) |
|
| Filter Mode(s) |
Low-Pass only |
| Filter Slope(s) |
12/24 dB/octave |
| Filter Frequency Range |
50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer |
Yes |
| Filter Defeat Function |
Yes |
| Infrasonic Filter |
30 Hz, defeatable |
| Bass Boost EQ (0 to +12 dB @ 45 Hz) |
No |
| Output Polarity Switch |
No |
| Remote Subwoofer Level Control |
Optional (HD-RLC) |
| Pass-Through Preamp Output |
Buffered |
|
| Height (H) |
2.05 in / 52 mm |
| Width (W) |
8.52 in / 216 mm |
| Depth (D) |
7.09 in / 180 mm |
| Net Weight |
4.6 lb / 2.06 kg |
-
-
Type:
Amplifiers
-
-
Width:
8.52"
-
Height:
2.05"
-
Depth:
7.09"
-
-
Energy Star Rated:
No
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Electronics
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
electronics
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.
