The W12 is the mid-sized model within the Anthra subwoofer series. It features a 12 (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver powered by a Class-D 1,000 Watt amplifier, housed within a comprehensively internally braced, sealed-box cabinet.
Engineered to deliver impressive bass in medium and large spaces, the Anthra W12 subwoofer features a formidable 1,000 Watt Class-D amplifier driving a 12 (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W12 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.
A full-colour LCD display and rotatory dial is located on the back panel, to allow for basic subwoofer setup and EQ preset selection, while advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.
- 1 x 12 (30cm) Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium (C-CAM) high-excursion driver for super-clean performance
- 1 x 1000 Watt Class-D amplifier ensures that the driver is working to its optimum performance level, no matter what the volume
- Massive motor assembles and longer round-wound voice coils, which are dual layered and made of copper-coated aluminium wire (CCAW) for precise control at extreme low frequencies
- 2 inch full-colour LCD display screen with rotary dial for menu selection and basic setup
||Active - Sealed Cabinet
|Drive Unit Complement
||1x 12" (305 mm) High Linear-Excusion Triple Suspension Driver
|Lower Frequency Limit
|Upper Frequency Limit
||(LPF Off) -6dB @400Hz
|Driver Excursion (pk-pk)
||28 Bit 50 MIPS Configuratable through MaestroUnite
|Analogue Digital Conversion
||Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals
|Amplifier Output Power, 240Vac
||Instantaneous: 1700 W* Continuous short-term: 900 W**
|Amplifier Output Power, 120Vac
||Instantaneous: 1325 W Continuous short-term: 700 W
|LED UI Control
||0-360 Degrees measured at LPF Crossover
|Low Pass Filter
||20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct
||Configurable through MaestroUnite;3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass)
||Wide adjustable input gain to allow maximum output from a wide range of input signals
||Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)Mono/LFE Balanced XLR
||Stereo unbalanced outputs with unbuffered throughput from RCA Inputs Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input
|Mains Input Voltage
||Universal Mains, 85-265VAC
|External Dimensions (without feet) (HxWxD)
||374 x 374 x 374 mm
||Braced 25 mm thick MDF with 36mm front baffle
||Cloth covered magnetically attached Grilles
|* Maximum RMS output for an instantaneous signal
||* Maximum RMS output for an instantaneous signal
|** Sinewave for 10 seconds
||** Sinewave for 10 seconds
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.